Archive

Category Archives for "Home Furniture"

Should I Turn Off Water Heater if Water is Off?

Should I turn off water Heater if water is off? This is perhaps one of the most commonly asked questions on the internet, and, as is often the case with questions asked on the internet, it’s at the same time, one of the most ill-advised.

Should I turn off water heater if water is off? Honestly, the true answer is it depends on some scenarios. There are a wide variety of scenarios where either answer would suffice, but there isn’t one simple answer to this. First of all, considering the fact that the water heater itself, especially high quality tankless water heater, was designed to be as accident-free as possible.

When You Should Turn the Heater Off

  • The first scenario is the most obvious one, and it’s not merely advice to help you keep safe. This comes about when, for instance, your water tank is empty and you’re leaving for an extended period of time. Most water heaters usually divided into two, separating the cold and hot water.
  • They also have a dip tube on the cold water side that keeps the cold water at the bottom of the tank. If anything happens and pressure is lost on the cold water side, the tank siphons down through the cold water inlet until it reaches the bottom of the dip tube. Then, considering there's no more water in the tank to absorb this heat, the dip tube may melt and the tank will end up getting be damaged.
  • However, this is a very unlikely scenario, since it depends on the absence of water from your tank, which, in itself is completely unlikely. You’d have to intentionally cut off the supply from the water tank, or otherwise, be experiencing serious water shortages for this to over come into play. Should I turn off water heater if water is off? In the scenario your water tank is empty or significantly lacking water, the answer simple answer is yes.

When it really doesn’t matter to turn it off

  • If my water tank significantly is full, should I turn off water heater if water is off? Most people ask, If my water heater is left on, and the water supply is shut off, will any damage occur to the gas fired water heater, if very little of the hot water won’t be used much, or not at all?
  • Well, if you won’t be using the water for some time, and the water will only be off for a short time there is little to no risk involved. You can also shut off the cold feed valve just to ensure no water is siphoned out of the tank if cold water is also used with the tank off.

This would, however, not allow much of the hot water to be used out of the tank as this will have now air locked the system. You need to note, however, that the water heater will still turn on and off to maintain the water temperature inside of the tank, anyway.

Think about what would happen if you ever go away for a prolonged period of time. In most circumstances, there will be no water use for days, maybe even weeks and this doesn’t cause any problems with the tank. Even if someone does use water from the tank most (if not all) modern water heaters have low water cutoffs normally built into the unitroll (or aquastat).

Now, your tank has a dip tube for the inlet. This dip tube, according to standard specifications, stops 4 to 8 inches above the unitroll (this basically regulates temperature water inside the tank). It ensures that for whatever reason if the cold supply happens to lose pressure, the water isn’t siphoned out of the tank completely.

This design is meant to avoid the tank from being "tricked" to continuously running in order to try and maintain temperature if all of the hot water in the tank is used up. This also helps avoid the possibility of a melting dip tube or a catastrophic failure of the tank.

  • Should I turn off water heater if water is off? Don’t worry. The fabulous design already did your job for you. You don’t have anything to worry about.

Should I Turn Off Water Heater if Water is Off? The final answer

  • To be honest, and completely realistic, there is no danger involved in having the tank on with the water off, especially since the tank works through water pressure in order to supply the hot water and the tank pressure will be equal to your water pressure the whole time - if there’s no inlet water pressure, there will be no resultant outlet water pressure.
  • Besides, if shutting off your water and leaving your water heater on even happens to cause damage or catastrophic failure, then the water heater manufacturers would be up to their necks in lawsuits every day. That’s the whole point of engineering, really. Even if it did cause any issues, all the parts of the machine, including the labor provision and costs, would be covered by the manufacturer.
  • So, should I turn off water heater if water is off? At this point, it’s hard to say anymore. Depending on your situation, you should or you shouldn’t.

What makes recliners and stress-free chairs so special?

Where do recliners come from?

Recliners have been part of our home and even office furniture since the early 1920s. They became an instant hit after people discovered the increased level of comfort they provided. Since then, recliners have become highly popular all over the world. Today, you have the choice of selecting any kind of recliner you want that would fulfill all your requirements and preferences. Now, you get to decide the color, shape, material, adjustments/settings, type, extensions and additional features that are best suited to your own needs.

recliner has been become a favorite type of chairs of many people, especially elderly

recliner has been become a favorite type of chairs of many people, especially elderly

Recliners: A Permanent Fixture in Our Homes

Recliners are a standard component of home furnishing for quite some time now and the reason they became a permanent fixture in your home is due to the flexibility, style and comfort they offer. It is not only the perfect piece of furniture for the elderly, but also a great way to relax for other members of the family. You can place a recliner in any room and it will fit right in.

Recliners Today

Over the years, numerous developments have been made in the types and designs of recliners. This has been done to keep up with the latest trends in the market while giving the user increased control and customizability. Despite the constant change and improvements in the design and type, it has not deviated from its true and basic purpose. Recliners continue to be designed for comfort and support with a special focus on relieving muscle and back pain.

In the past, recliners only allowed the occupant to relax by having their feet elevated and the back reclined. But todays models offer the user multiple seating options, a wide number of settings and features that can be adjusted according to requirements and liking. These options include features like:

  • Heat
  • Wall huggers
  • Gliders
  • Overstuffed
  • Massage

Other options in the modern day recliner include features like:

  • Storage Compartments
  • Cup Holders
  • Lift Systems

 

With the availability of new options in stress-free chairs, more and more features have made it possible for people to make the selection according to their own tailored needs. Though, it can be overwhelming for shoppers to decide exactly what kind of recliners they want when there are so many options available. It is always best to list down what precisely you are looking for when you picture your perfect stress-free chair and then match them against the available options.

Why Recliners?

Recliners should be your go-to choice for comfort furniture because:

  • It is the perfect piece of furniture for lounging and relaxing.
  • Recliners are very easy to use, operate and adjust. You can control movements and settings at the touch of the button.
  • It provides good lumbar and neck support.
  • Recliners are highly useful for the comfort of people with certain medical conditions or for the elderly with limited mobility.

Recliners and stress-free chairs can recline, rock, swivel, lift, and massage among other functions to provide you with the most comfortable sitting position.

Riser Recliner Chairs For The Elderly

How to Fix the Lever on a Recliner

The lever is one part of the recliner which is subjected to continuous wear and tear due to its usability. Every time you want to raise the foot rest, you pull it again and again. Over time it can get stripped or broken so that it stops working and you cannot recline the chair anymore. But there is nothing more annoying than your recliner chair stop working when your favorite TV show is about to start. The best thing is recliner levers are simple and easy to fix. By figuring out the problem, you can solve it on your own without even having to call the repair guy.

Step 1

Turn you recliner chair upside down so that it rests on the floor. Take a good look and see what really happened. Check thoroughly and tighten all the mounting bolts if they are loose. If you feel the need of lubrication, lubricate the parts with some oil or any appropriate lubricant.

Step 2

If the cable inside the lever is broken, you have to replace it with a new one. Before that, you need to pull out the old lever from the recliner. Use a screwdriver and pliers to undo the screws on the back of the handle which actually helps it to stay in place. You will see the end of the cable which runs from the lever handle. Firstly, unscrew the lever and pull out the cap. Locate the place where the cable is attached to the bottom part of the recliner. By using a plier, try to pull out the lever cable by compressing the clip. Remove the cable assembly carefully from the lever. You need to take the length of the cable and order one from the same manufacturer.

Step 3

Look for serial number and service customer care numbers so that you can contact them for a replacement if you are still under the warranty. Try whether you can get a free repair service so that everything can be done easily without spending any money. Some parts of the recliner will have a lifetime warranty, so you need to make sure that you do not miss it. If you are buying a new part on your own, note the manufacturer name and buy the right one. If you need any guidance, the furniture store assistants will be able to help you to find out a correct replacement.

Step 5

After purchasing the new cable, you need to install it which is a simple process. Slide the cable into the place where the lever originally was. Keep it in the correct position and secure it with the clip into the actuator. Place the recliner in an upright position and attach the cable up to the lever mechanism. Finally, test it out to see whether it works properly or not.

If you can manage yourself doing all these repairs, it is better. Whereas, if you are unable to do it on your own, call a professional repair service to seek their help.

Video guide: How to fix a recliner by replacing handle on reclining chair