For your wooden DIY projects choosing between what power saw to use is usually a conundrum. In this article, we will define and differentiate the circular saw and the table saw to guide you on which one you should use for your DIY projects.

Even before the invention of the electric motor, the table saw and the circular saw were already in use although it was still hand driven. Only after the rise of the electric motor did we see a properly working electric saw which could turn logs into lumber.


Throughout history, there have been many claims as to who truly invented the circular saw. Some say that it was invented by Samuel Miller in 1777, and other say it was Gervinus of Germany in 1780. Still, whoever invented this powerful tool gave saw-mills, and DIY craftsmen a great gift.

In our modern era, we know the circular saw as a portable electric driven saw. Mainly, it is used for cutting wood, bricks, plastic, and even metal. This will all depend on the blade attached to the motor.

To use the circular saw, the material to be cut should be stationary. Slowly place the spinning blade on the material that you intend to cut. You will notice that the guard will retract slowly and smoothly during the cutting process and as soon as the cutting is done, the guard will retract in place.

Accuracy is one of the disadvantages of the circular saw. Using this type of power tool needs skill and practice since the saw itself is a little bit heavy. Having a good grip and steady hands is the secret in making a straight and perfect cut.


Unlike the circular saw, cutting with the table saw will almost always produce straight and precise cuts. From the name itself, the table saw is also a type of circular saw but it is mounted on a table which makes it a stationary spinning disc driven by an electric motor.

The table saw is most often used by craftsmen and DIYers since it can produce precise and straight cuts. By using the table saw, wood workers are able to make an assortment of deep cuts, angle cuts, and extremely long cuts. Since the material is the one that is held and moved, producing such cuts is possible.

Guardrails which are adjustable makes sure that the material being but is accurate to the millimeter every single time a cut is made. At the same time, angled cuts can also be made by tilting the guard rails to the desired angle.

When cutting small or very thin materials, a push rod is required to avoid any accidents. Getting your hands dangerously close to a high speed spinning blade will usually result in severed fingers or hands if safety and precaution are disregarded.


The circular saw and the table saw performs the same exact function, cutting. Two very similar power tools but have very different ways of using. So what are the differences of the table saw and the circular saw?


In terms of the material that can be cut by both the circular saw and table saw, there is no difference whatsoever. Both can cut wood, plastic, tiles, bricks, and even steel. It will all depend on what blade is put on the motor.


The circular saw wins in this category since it can be easily carried by the craftsman. Although the table saw can be transferred when one wants to use it, it will still take at least two grown men to lift the table and put it on a certain spot.

The circular saw on the other hand was basically designed to be a saw that can be used by a craftsman repeatedly without having to exert so much physical effort.


Cutting a material with precision and accuracy is hard to achieve by any amateur DIYer or craftsman. This is especially true when the cutting tool being used is a manual hack saw or a heavy and bulky circular saw.

With the table saw, precise and straight cuts can be easily accomplished. With the use tight guard rails, the stationary high spinning blade can cut any material into the desired measurement or angle with pinpoint precision.

You may also like: best table saw under 1000


The invention of the power saw made life so much easier for DIYers. Creating woodcrafts and furniture became so much easier. While cutting logs into specific size of lumber became more efficient and produced less wastage.

However, with all these great qualities of the circular saw and the table saw, there are still a few disadvantages that can be noted. Here are the pros and cons of these power tools.



PORTABLE AND HANDHELD: This means less physical effort and more materials can be cut in a short amount of time.
HIGH SPEED CUTTING: The super-fast spinning blade is able to cut through a thick slab of wood in the blink-of-an-eye.
ELECTRIC POWERED: Less noise and no carbon monoxide
emissions. The electric motor is so clean and efficient that it has worked
wonders in the power tool business. The cordless circular saw powered by a battery operated DC motor makes the saw a lot more portable.


ACCURACY: Making precise cuts while carrying a heavy saw is hard if done by anyone who is not skilled in using the circular saw.

SAFETY HAZARD: Blades spinning at high speeds can usually create debris that can fly off in blinding speeds. Literally, these splinters can blind you. So the use of gloves and goggles are required.



ACCURACY: The disadvantage of the circular saw can be answered by using a table saw to cut material with precise measurements and angles.

In addition, high speed cutting and being electrically powered are also positive traits for the table saw. The same as the circular saw.


HEAVY AND STATIONARY: Not being able transfer the table saw at a moments’ notice is usually a pain especially when all your heavy materials are far away from the table.

SAFETY HAZARD: The same as the circular saw, personal protective equipment is needed before using the table saw.


To be a complete craftsman and DIYer, the use of both the Circular saw and Table saw should be mastered. These power saws can cut materials fast, accurate, and precise.

With the circular saw, you can cut huge slabs of wood into smaller pieces before going to the table saw to cut your wood to your desired measurements precisely.

The use of the circular saw and table saw will usually go in tandem with each other. It will all depend on the skill of the craftsman.The use of the circular saw and table saw will usually go in tandem with each other. It will all depend on the skill of the craftsman.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: