Best Four Types of Toilet Flushing System You Need to Know About

You might not have put so much thought on the types of toilet flushing system but when you are building your dream home – it becomes crucial. Each time you pull down the lever of the toilet flush, water washes out the wastes. It seems too simple but remember – you are using water that is too valuable and precious.

The manufacturers and the innovators are always busy working on the flushing systems to polish up the process. They want to work on better ways of cleaning while utilizing the minimum amount of water each time.

The flushing systems also represent your sense of hygiene and cleanliness. You cannot change your toilet flushing system easily every now and then. It is sort of a permanent thing. So, you have to decide which system you should install that makes your home better in every way. “Think before you leap” – this proverb is very true in this case.

So, let’s not waste any more words and discuss the types of toilets with flushing system available in the market today.

Best Four Types of Toilet Flushing System

Gravity Flush

First on the list is the gravity flush. This system is also known as the traditional system as it utilizes gravity to propagate the water and drain out the wastes. The simple laws of physics construct this design. As you know, the water tank rests slightly higher than the toilet seat or the toilet bowl. The gravity plays a vital role to impose pressure on the resting water in the water tank.

When a lever or a button is pushed, the water gate opens, and the water on the tank travels through the pipelines with an ample amount of force to wash out the waste. When the water is channeled into the bowl two things happen at the same time – it cleans the bowl and removes the waste.

As I have mentioned, the gravity flush system is sometimes called the traditional system as it has been around us for centuries. The water tank in such a system typically carries 6 to 17 liters of water. So, you see, the system needs a lot of water per flush.

The pressure releasing handles, pulling chains, or buttons can trigger the water to flow in the bowl.

Pressure-Assisted Flushing System

Next on the list comes the pressure-assisted flushing system. This flushing system has almost the same mechanics as the gravity flushes. The main difference is that this mechanism utilizes a pressure creating rubber diaphragm. This diaphragm is better known as the pressure vessel.

The pressure vessel resides inside the water tank. The main function of this pressure vessel is to create a higher flow rate of water when the flush is activated. The higher flow of water cleans the toilet bowl in a better fashion. As the system can force the water in a higher rate, it requires much less water than the gravity flushing system.

This can be called a modern version of the traditional gravity flushes. There are two downsides of this flushing mechanism. First, it requires higher maintenance than the regular ones. Second, the pressure valves need to be replaced every ten years.

It utilizes 3.8 to 5.3 liters of water each flush. The earlier models used to make loud noise due to pressure releasing mechanism which was a bit awkward for the users. The problem eradicated in the later models. But remember the quieter versions might use less force while flowing the water.

You may also like: pressure assisted flushing systems.

Dual Flush

The dual flush mechanism is a more modern design. The system is water-saving. The liquid wastes need much less water to clean out compared to the solid wastes. The system gives an extra option to the users. A user could use less water or go for full flushes according to the need.

The partial flushes that are more suitable for liquid wastes utilize 1.1 gallons of water that are roughly 4.1 liters of water per flush. The full flush, on the other hand, uses about 6 liters of water per flush.

Many countries are suggesting the residents use the dual flush system as the system is more environment-friendly.

Some of the companies are now combining the pressure-assisted flushing system with the dual flush system. This combination is even more effective.

Double Cyclone

Dual cyclone or the tornado flush system is relatively more modern design of the toilet flushing system. The design is developed by the ToTo Company. So, how is the design different from the older models?

The double cyclone flushing system uses two large nozzles instead of the smaller rim hole. These two large nozzles create a cyclone or tornado-like water flowing that is much stronger flow than other design. The flow of power is 1.6 GPF. A single flush needs 1.28 gallons or 4.8 liters of water. It doesn't have a dual flow system for the solid and the liquid wastes.

After the water rinsing and cleaning the waste from the toilet bowl. Freshwater then resides on the bowl.

The system is well-capable of cleaning the toilet papers and the solid waste. The reason behind this system being the most efficient is the better propulsion system. The propulsion system causes to direct more water to the siphon.

Concluding Words

So, these are the common types of toilet flushing system that you can find in the market. Other than these systems, some companies are trying to implement a waterless solution. But that is mechanism too uncommon, and you might not find the kind of flush in your local market. So, I skipped that design.

Remember to choose the kind of toilet flush that is effective and water-saving for your home. The toilet is the most water-consuming place in your home. If you don't choose the efficient system, you might end up having ridiculous water bill each month. Make sure to choose the system that not only uses less water but also efficient in cleaning the toilet bowl.

I would suggest you go for either dual and pressure-assisted hybrid or the double cyclone flush mechanism. These designs are modern, aesthetic, and efficient.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: